XiP Pro

XiP Pro

Large Build Volume

With a 19.5L build volume, XiP Pro delivers the daily throughput of 4+ other industrial resin-based printers, allowing you to dramatically change the economics of your 3D printing production, on top of reducing your investment in equipment. With its unique stacking ability you can optimize every build by easily stacking your smaller parts on top of one another to take full advantage of XiP Pro’s entire build volume. From extra large parts to many smaller parts, XiP Pro can do it all.

Blazing Fast Print Speed

Tradeoffs have always been a key component of 3D printing – if you want speed, you have to compromise on quality. Not anymore. With industry leading print speed of up to 24 vertical centimeters per hour, XiP Pro can produce its entire build volume in under two hours. Its patented LCD-based LSPc print technology uses a self-lubricating membrane that enables lighting-fast print speed and unprecedented production value without sacrificing print quality or surface finish.

Materials

Custom Resin 1kg
Custom Resin 1kg

Color: Custom

Size: 1 kg

The Custom Resin cartridge is required alongside NexaX Pro for Xip to access the open materials platform. The cartridge communicates with the XiP and NexaX to open the printer and manage custom material versioning.  It operates the same as all other cartridges with gravity-fed resin dispensing and NFC technology.

 


$49.00
xMODEL15-Black 5kg Resin
xMODEL15-Black 5kg Resin

$273.00
xMODEL15-Black Resin 1.5kg for XiP and XiPPro
xMODEL15-Black Resin 1.5kg for XiP and XiPPro

Color: Black

Size: 1.5kg

This is an economical modeling material that yields suburb feature resolution and accuracy to serve a wide variety of modeling applications. Formulated to deliver exceptional first-time print success, xMODEL15 exhibits excellent detail and a high-quality surface finish.

Measurement

Value

Test Method

Modulus of Elasticity

1800 MPa

ASTM D638 type4

Tensile Strength

55 MPa

ASTM D638 type4

Elongation at Break

10%

ASTM D638 type4

Viscosity

200 – 300 MPA.s

GB/T 22235

Hardness (Shore D)

78 – 80

ASTM D2240

Heat Deflection Temperature

50°C

GB/T 1634

Water absorption

0.7%

Immersion after 24 hrs

Technical Datasheet

Safety Datasheet


$97.50
xMODEL17-Clear 1.5kg Resin for XiP and XiPPro
xMODEL17-Clear 1.5kg Resin for XiP and XiPPro

Color: Clear / Translucent

Size: 1.5kg

Introducing xMODEL17-clear, a high-clarity, prototyping resin from Nexa3D. xMODEL17-Clear prints in unmatched clarity and with fine feature detail—all at eye-watering speeds.

Uses

  • Figurines and Art pieces
  • Lighting Applications
  • Packaging concepts

Property

Value

Test

Tensile Modulus

1213 MPa

ASTM D638

Ultimate Tensile Strength

30 MPa

ASTM D638

Tensile Elongation at Break

22%

ASTM D638

Flex Modulus

1467 MPa

ASTM D790

Flex Strength

57 MPa

ASTM D790

Notched Izod

47 J/m

ASTM D256

HDT @0.45 MPa

47º C

ASTM D648

Water Absorption

0.24%

ASTM D570

Technical Datasheet

Safety Datasheet

 


$213.00
xMODEL15-Gray 5kg Resin
xMODEL15-Gray 5kg Resin

$273.00
xPP405-Black Resin 1.5kg for XiP and XiPPro
xPP405-Black Resin 1.5kg for XiP and XiPPro

Color: Black

Size: 1.5kg cartridge

Tough, impact-resistant material with a modulus similar to molded, unfilled polypropylene. Exhibits excellent weathering characteristics and UV stability making it suitable for end-use part applications. 

Characteristics 

  • Tough, impact-resistant material with a modulus similar to molded, unfilled polypropylene 
  • Good weathering 
  • Smooth black surface finish 

Uses 

  • Design verification models 
  • Functional prototypes 
  • End-use parts including packaging,  piping, and consumer and industrial  applications, including large housings  and enclosures 

Property/Test 

Value

Test

Tensile Modulus

1580 MPa

ASTM D638

Ultimate Tensile Strength

42 MPa

ASTM D638 

Tensile Elongation at Break

87%

ASTM D638

Flex Modulus

1180 MPa

ASTM D790

Flex Strength

50 MPa

ASTM D790

Hardness (Shore D)

80

ASTM D2240

Notched Izod

62 J/m

ASTM D256 

HDT @0.45 MPa

53ºC

ASTM D648

Water Absorption

1.00%

ASTM D570

Technical Data Sheet

Safety Data Sheet


$378.00
xABS3843-Black Resin 1.5kg for XiP and XiPPro
xABS3843-Black Resin 1.5kg for XiP and XiPPro

Color: Black

Size: 1.5kg

Tough and durable material with the aesthetics of injection molded black ABS. High performance, high modulus material boasting excellent flexural and tensile physical properties with a relatively high degree of elongation. It displays high green strength and good heat deflection temperature enabling it to print accurately and function  in a wide variety of applications. It has been tested in QUV exterior weathering  conditions (ASTM G-154) for 800 hours with less than a 15% change in Tensile and IZOD Impact properties.

Characteristics

  • ABS-like stiffness
  • Tough & durable
  • Great feature detail 

Uses 

  • Design verification models • Functional prototypes 
  • Snap fits 
  • Jigs and fixtures 
  • Patterns 
  • End-use parts 
  • Good weathering performance

Property

Value

Test

Tensile Modulus

1400 MPa

ASTM D638

Ultimate Tensile Strength

30 MPa

ASTM D638

Tensile Elongation at Break

50%

ASTM D638

Flex Modulus

1400 MPa

ASTM D790

Flex Strength

30 MPa

ASTM D790

Hardness (Shore D)

86

ASTM D2240

Notched Izod

54 J/m

ASTM D256

HDT @0.45 MPa

56º C

ASTM D648

Water Absorption

2.35%

ASTM D570

Technical Data Sheet

Safety Data Sheet


$360.00
xMold Resin 5 kg
xMold Resin 5 kg
xMOLD is a high-performance dissolvable resin developed for Freeform Injection Molding (FIM). The resin is optimal prototyping injection molding parts without the hassle of complex mold design.

$2,001.00
xPEEK147 resin 5kg-NA
xPEEK147 resin 5kg-NA

$1,694.00
xMODEL35-Black Resin 1.5kg for XiP and XiPPro
xMODEL35-Black Resin 1.5kg for XiP and XiPPro

Color: Black

Size: 1.5kg

Rigid Resin with optimum combination of strength, stiffness and temperature resistance.

Measurement

Value

Test Method

Viscosity, 30 °C

630 mPas

Cone/Plate Rheometer1

Elastic Modulus

2600 MPa

ASTM D638

Ultimate Tensile Strength

62 MPa

ASTM D638

Elongation at Break

10%

ASTM D638

Flexural Modulus

2300 MPa

ASTM D790

Flexural Strength

108 MPa

ASTM D790

Notched IZOD (Machined), 23 °C

21 J/m

ASTM D256

Unnotched IZOD, 23 °C

112 J/m

ASTM D256

HDT at 0.45 MPa

87°C

ASTM D648

Flammability

HB

UL 94 1.5 mm

Hardness (Shore D)

83

ASTM D2240

Water Absorption, Short Term (24 hours

0.42%

ASTM D570

Technical Datasheet

Safety Datasheet


$216.00
xFLEX475-White Resin 1.5kg for XiP and XiPPro
xFLEX475-White Resin 1.5kg for XiP and XiPPro

Color: White

Size: 1.5kg

A medium soft rubber-like material that cures to a soft, elastomeric finish.  This material also boasts an impressive 150 percent elongation at break, an excellent energy return of up to 50 percent, and resistance to most solvents.

Characteristics

  • Soft elastic
  • A single component with low viscosity

Uses

  • Resilience, snap back and tear resistance elastomeric applications
    • pipes and manifolds,
    • handles and grips
    • seals and gaskets
    • sportswear and footwear midsoles

Measurement

Value

Test Method

Tensile Modulus

4.6 MPa

 ASTM D638

Ultimate Tensile Strength

3.8 MPa

ASTM D638

Tensile Elongation at Break

159%

ASTM D638

Energy Return

39.13%

Internal

Tear Strength

11.77 kN/m

ASTM D624

Hardness (shore A)

55 A

ASTM D2240

Technical Datasheet

Safety Datasheet


$424.50
xABS3843-Black Resin 5kg
xABS3843-Black Resin 5kg

Tough resin ideal for tooling and end use parts


$1,150.00
Custom Resin 1.5kg for XiP and XiPPro
Custom Resin 1.5kg for XiP and XiPPro

$49.00
xPEEK147-Black Resin 1.5kg for XiP and XiPPro
xPEEK147-Black Resin 1.5kg for XiP and XiPPro

Color: Black

Size: 1.5kg

xPEEK147 is a high-temperature resistant resin with HDT 230°C for tooling and molding applications. The material showcases good dimensional stability, good surface finish, and sufficient toughness to withstand mechanical stresses from molding processes. This material is resistant to temperature stress and is ideal for tooling applications.  

Characteristics

  • High-Temperature resistance
  • High Strength
  • Withstands chemical and corrosive environments
  • Low water absorption

Uses 

  • 3D printed tooling
  • High-temperature prototypes
  • Masks for electroplating

Property

Value

Test

Tensile Modulus

3192 MPa

ASTM D638

Ultimate Tensile Strength

75 MPa

ASTM D638

Tensile Elongation at Break

3.0%

ASTM D638

Flex Modulus

3168 MPa

ASTM D790

Flex Strength

128 MPa

ASTM D790

Hardness (Shore D)

94

ASTM D2240

Notched Izod

14.6 J/m

ASTM D256

HDT @0.45 MPa

238º C

ASTM D648

Water Absorption

0.25%

ASTM D570

Technical Datasheet

Safety Datasheet


$523.50
xCERAMIC3280 1.5L Resin for XiP and XiPPro
xCERAMIC3280 1.5L Resin for XiP and XiPPro

Color: White

 Size: 1.5L

xCERAMIC3280 is a ceramic composite-filled resin from Nexa3D that combines rigidity and high heat deflection, with a ceramic look and feel, unlocking new 3D printing possibilities.

Uses

Characteristics

  • Excellent strength properties
  • Smooth surface finish
  • Low viscosity for fast printing

Uses 

  • wind-tunnel test models
  • mold tooling for injection molding
  • home goods
  • housings and enclosures

Property

Value

Test

Tensile Modulus

9410 MPa

ASTM D638

Ultimate Tensile Strength

40 MPa

ASTM D638

Tensile Elongation at Break

0.5%

ASTM D638

Hardness (Shore D)

96

ASTM D2240

HDT @0.45 MPa

280º C

ASTM D648

Water Absorption

0.29%

ASTM D570

Solid Density

1.73 g/cm3  ASTM D792

Technical Datasheet

Safety Datasheet


$421.50
PRO9499-White Resin 1.5kg for XiP and XiPPro
PRO9499-White Resin 1.5kg for XiP and XiPPro

Bright White Modeling Resin | PRO9499 White
PRO9499 White from Henkel® is a cost-effective modeling material that delivers superb feature resolution and accuracy. It maintains a brilliant matte white finish even after post-curing, making it perfect for a wide variety of modeling applications. With exceptional detail and high-quality surface finish, it’s designed for great first-time print success.

Download Technical Data Sheet


$135.00
xMODEL15-Gray Resin 1.5kg for XiP and XiPPro
xMODEL15-Gray Resin 1.5kg for XiP and XiPPro

Color: Gray

Size: 1.5kg

This is an economical modeling material that yields suburb feature resolution and accuracy to serve a wide variety of modeling applications. Formulated to deliver exceptional first-time print success, xMODEL15 exhibits excellent detail and a high-quality surface finish.

Measurement

Value

Test Method

Modulus of Elasticity

1800 MPa

ASTM D638 type4

Tensile Strength

55 MPa

ASTM D638 type4

Elongation at Break

10%

ASTM D638 type4

Viscosity

200 – 300 MPA.s

GB/T 22235

Hardness (Shore D)

78 – 80

ASTM D2240

Heat Deflection Temperature

50°C

GB/T 1634

Water absorption

0.7%

Immersion after 24 hrs

Technical Datasheet

Safety Datasheet


$97.50
xFLEX475-Black Resin 1.5kg for XiP and XiPPro
xFLEX475-Black Resin 1.5kg for XiP and XiPPro

Color: Black

Size: 1.5kg

A medium soft rubber-like material that cures to a soft, elastomeric finish.  This material also boasts an impressive 150 percent elongation at break, an excellent energy return of up to 50 percent, and resistance to most solvents.

Characteristics

  • Soft elastic
  • A single component with low viscosity

Uses

  • Resilience, snap back and tear resistance elastomeric applications
    • pipes and manifolds,
    • handles and grips
    • seals and gaskets
    • sportswear and footwear midsoles

Measurement

Value

Test Method

Tensile Modulus

4.6 MPa

 ASTM D638

Ultimate Tensile Strength

3.8 MPa

ASTM D638

Tensile Elongation at Break

159%

ASTM D638

Energy Return

39.13%

Internal

Tear Strength

11.77 kN/m

ASTM D624

Hardness (shore A)

55 A

ASTM D2240

Technical Datasheet

Safety Datasheet


$424.50
xDENT201-Gray Resin 1.5kg for XiP and XiPPro
xDENT201-Gray Resin 1.5kg for XiP and XiPPro

Color: Gray

Size: 1.5kg

A high-resolution material designed for ultrafast production of orthodontic models. Showcasing great accuracy and dimensional stability, xDENT201-Gray is your material of choice when printing models in high volumes for aligner manufacturing or other orthodontic modeling needs. This matte gray resin provides excellent visibility to fine feature details.

Characteristics

  • Rapid printing; full build of flat models in 20 minutes
  • Matte Gray for excellent feature visibility
  • Good dimensional stability

Uses 

  • Orthodontic Models 
  • Game pieces and scale models

Property

Value

Test

Tensile Modulus

2366 MPa

ASTM D638

Ultimate Tensile Strength

54.9 MPa

ASTM D638

Tensile Elongation at Break

4%

ASTM D638

Hardness (Shore D)

80

ASTM D2240

Technical Datasheet

 


$97.50
xPP405 Black resin 5kg
xPP405 Black resin 5kg

$1,210.00
xMODEL17-Clear 5kg Resin
xMODEL17-Clear 5kg Resin
Color: Clear / Translucent Size: 5kg Introducing xMODEL17-clear, a high-clarity, prototyping resin from Nexa3D. xMODEL17-Clear prints in unmatched clarity and with fine feature detail—all at eye-watering speeds.

$660.00
xPRO1100 Black Resin 1.5kg for XIP and XIP PRO
xPRO1100 Black Resin 1.5kg for XIP and XIP PRO
1.5kg bottle of xPRO1100 resin for XiP or XiP Pro

$240.00
xCE-Black Resin 1.5kg for XiP and XiPPro
xCE-Black Resin 1.5kg for XiP and XiPPro

High stiffness and temperature materials with the aesthetics and environmental longevity of injection molded nylons, polyesters, polyamides and polyimides. xCE is proven for production parts in the field, including in harsh outdoor exposure with sun, humidity, and heat.

Characteristics

  • High-performance plastic stiffness
  • High temperature
  • Durable, resistant to chemicals

Uses

  • Functional prototypes subject to higher temperature evaluations
  • Low volume injection molding inserts for lower temperature plastics
  • End use parts

$451.50
xDENT341-Beige Resin 5kg
xDENT341-Beige Resin 5kg

Color: Beige

Size: 5 kg

A high-resolution material designed for 3D printing removable die models with incredible accuracy and great dimensional stability. For this application, proper fit is key. This resin yields removable die models exhibiting precise margins and contacts to deliver highly-accurate custom prosthodontic treatments like crowns, bridges, and other implants.

Characteristics

  • Excellent accuracy, excellent dimensional stability
  • Traditional Beige color 

Uses 

  • Removable Die Models 
  • Game pieces and scale models

Property

Value

Test

Tensile Modulus

1860 MPa

ASTM D638

Ultimate Tensile Strength

40.8 MPa

ASTM D638

Tensile Elongation at Break

2.7%

ASTM D638

Hardness (Shore D)

84

ASTM D2240

Technical Datasheet


$425.00
xDENT341-Beige Resin 1.5kg for XiP and XiPPro
xDENT341-Beige Resin 1.5kg for XiP and XiPPro

Color: Beige

Size: 1.5kg

A high-resolution material designed for 3D printing removable die models with incredible accuracy and great dimensional stability. For this application, proper fit is key. This resin yields removable die models exhibiting precise margins and contacts to deliver highly-accurate custom prosthodontic treatments like crowns, bridges, and other implants.

Characteristics

  • Excellent accuracy, excellent dimensional stability
  • Traditional Beige color 

Uses 

  • Removable Die Models 
  • Game pieces and scale models

Property

Value

Test

Tensile Modulus

1860 MPa

ASTM D638

Ultimate Tensile Strength

40.8 MPa

ASTM D638

Tensile Elongation at Break

2.7%

ASTM D638

Hardness (Shore D)

84

ASTM D2240

Technical Datasheet

 


$142.50
xDENT201-Gray Resin 5kg
xDENT201-Gray Resin 5kg

Color: Gray

Size: 5 kg

A high-resolution material designed for ultrafast production of orthodontic models. Showcasing great accuracy and dimensional stability, xDENT201-Gray is your material of choice when printing models in high volumes for aligner manufacturing or other orthodontic modeling needs. This matte gray resin provides excellent visibility to fine feature details.

Characteristics

  • Rapid printing; full build of flat models in 20 minutes
  • Matte Gray for excellent feature visibility
  • Good dimensional stability

Uses 

  • Orthodontic Models 
  • Game pieces and scale models

Property

Value

Test

Tensile Modulus

2366 MPa

ASTM D638

Ultimate Tensile Strength

54.9 MPa

ASTM D638

Tensile Elongation at Break

4%

ASTM D638

Hardness (Shore D)

80

ASTM D2240

Technical Datasheet


$275.00
xFLEX475-Black resin 5kg
xFLEX475-Black resin 5kg

$1,362.00
xMODEL35-Gray Resin 1.5kg for XiP and XiPPro
xMODEL35-Gray Resin 1.5kg for XiP and XiPPro

Color: Gray

Size: 1.5kg

Rigid Resin with optimum combination of strength, stiffness and temperature resistance.

Measurement

Value

Test Method

Viscosity, 30 °C

630 mPas

Cone/Plate Rheometer1

Elastic Modulus

2600 MPa

ASTM D638

Ultimate Tensile Strength

62 MPa

ASTM D638

Elongation at Break

10%

ASTM D638

Flexural Modulus

2300 MPa

ASTM D790

Flexural Strength

108 MPa

ASTM D790

Notched IZOD (Machined), 23 °C

21 J/m

ASTM D256

Unnotched IZOD, 23 °C

112 J/m

ASTM D256

HDT at 0.45 MPa

87°C

ASTM D648

Flammability

HB

UL 94 1.5 mm

Hardness (Shore D)

83

ASTM D2240

Water Absorption, Short Term (24 hours

0.42%

ASTM D570

Technical Datasheet

Safety Datasheet


$216.00
xESD Resin 1.5kg for XiP and XiPPro
xESD Resin 1.5kg for XiP and XiPPro

Color: Black

Size: 1.5kg

xESD is a black, rigid, static-dissipative photopolymer resin using a urethane dimethacrylate base that includes a stable dispersion of discrete functionalized carbon nanotubes to achieve consistent static dissipative properties. 
 

Measurement

Value

Test Method

Tensile Strength

68.1 MPa

ASTM D 638-14

Tensile Modulus

2.6 GPa

ASTM D 638-14

Yield Strength

40.6 MPa

ASTM D 638-14

Elongation at Break

3.8%

ASTM D 638-14

Flexural Strength

97.4 MPa

ASTM D 790-15*

Flexural Modulus

1.8 GPa

ASTM D 790-15*

Notched IZOD

24 J/m

ASTM D 256-10

Shore “D”

87

ASTM D 2240-15

Heat Deflection @1.8MPa

91.4ºC

ASTM D 648-16

Heat Deflection @0.45MPa

91.3ºC

ASTM D 648-16

Surface Resistance

10Ω 

ASTM D 257

Water Absorption

0.9%

ASTM D 570-98

Density

1.1 g/cm3

25°C

Viscosity

878.1 cps

25°C

Technical Datasheet

Safety Datasheet


$600.00
xFLEX475-White resin 5kg
xFLEX475-White resin 5kg
A medium soft rubber-like material that cures to a soft, elastomeric material. Customers can use this industrial strength material in applications that require resilience, snap back and tear resistance, such as pipes and manifolds, handles and grips, seals and gaskets or sportswear and footwear midsoles. This material also boasts an impressive 150 per cent elongation at failure, an excellent energy return of up to 50 per cent and is resistant to most solvents.

$1,362.00

Accessories & Consumables

Everlast-1 membrane for XiP Pro - 5-pak
Everlast-1 membrane for XiP Pro - 5-pak

$800.00
XiP Pro Air filters
XiP Pro Air filters

$100.00
Replacement LCD Modude for XiP Pro
Replacement LCD Modude for XiP Pro

$2,995.00
Everlast-1 membrane for XiP Pro - 2-pak
Everlast-1 membrane for XiP Pro - 2-pak

$360.00
Everlast-1 membrane for XiP Pro
Everlast-1 membrane for XiP Pro

$200.00

Software & Services

DentFlow Software License - 1 yr, 3 activations
DentFlow Software License - 1 yr, 3 activations

This is a 1-year license for Nexa3D's DentFlow software tools that streamline the production of dental devices on Nexa3D printers.

At checkout, you'll be asked to acknowledge our End User License Agreement.

Number of Activations: 3

 


$995.00
DentFlow Software License - 1 yr, 1 activation
DentFlow Software License - 1 yr, 1 activation

This is a 1-year license for Nexa3D's DentFlow software tools that streamline the production of dental devices on Nexa3D printers.

At checkout, you'll be asked to acknowledge our End User License Agreement.

Number of Activations: 1

 


$495.00
NexaX Pro for XiP Pro or NXE  - 1 yr, 3 activations
NexaX Pro for XiP Pro or NXE - 1 yr, 3 activations

This is three (3) activations for a 12-month license of NexaX Pro for XiP Pro or NXE400, our full suite of advanced tools to optimize prints, utilize the build volume to the fullest extent, and explore validated and Open resins.

NOTE: At least one activation of this software is required to use our XiP Pro and NXE printers.

At checkout, you'll be asked to acknowledge our End User License Agreement.


$2,995.00
NexaX Pro for XiP, XiP Pro or NXE  - 1 yr, 1 activation
NexaX Pro for XiP, XiP Pro or NXE - 1 yr, 1 activation

This is a 12-month license for NexaX Pro for XiP Pro or NXE400, our full suite of advanced tools to optimize prints, utilize the build volume to the fullest extent, and explore validated and Open resins. This version of the software also works with the XiP desktop printer.

At checkout, you'll be asked to acknowledge our End User License Agreement.

Number of Activations: 1

 


$1,995.00

Specs:

Build Volume

19.5L

Build Dimensions

292 x 163 x 410 mm (11.5 x 6.4 x 16.10 in)

Design

Modular / Upgradeable

Enclosure

Billet Aluminum

Interface

10″ High-Resolution LCD Touchscreen

LCD Resolution

7K (6480 x 3600)

Open System

Yes

Pixel Size

46 µm

Print Resolution

25 µm – 200 µm

Product Dimensions

622 x 447 x 895 mm (24.5 x 17.6 x 35.25 in)

Software

NexaX Pro or NexaX Basic

Validated Materials

19+ (updated monthly)